Category: Red Summit RF

I met Herb N7HG up in the Navajo Nation today and we put a Summits on the Air peak on the air for the first time. We were the first to activate it!

Join this channel and become a Premium Member for early access, behind-the scenes-content, and exclusive chats https://www.youtube.com/channel/UCHriEQX4EK2b0QS7EgSvjmg/join

#hamradio #sota #portableops #electronics #gear #shorts #amateurradio #STEM #qrp #cw #morsecode #vhf

Video #5 – After interviewing Tim Keen K5DEZ back in 2020, he suggested I homebrew a simple Morse code paddle from a design he came up with. Tim’s design was inspired by an article in QST Magazine by Art Heft K8CIT. He posted information about the project on the Summits on the Air reflector, here:
https://reflector.sota.org.uk/t/anyone-tried-morse-stick-key/19392/19
This the first video of a series of livestreams sessions I did where I built this paddle.

Pressure sensor for the paddle: https://amzn.to/3LypphX
PCB Board (the one I use is discontinued): https://amzn.to/3ERiZGX
Heat Shrink: https://amzn.to/3ZsId7Q
Circuit Board Holder: https://amzn.to/3yWAItJ
The flux I use: https://amzn.to/3nf5Sda
Solder: https://amzn.to/3lzeWJj
Soldering Tip Cleaner: https://amzn.to/3M0VPTt
Helping Hands – board holder: https://amzn.to/3JCzgl9

Join this channel and become a Premium Member for early access, behind-the scenes-content, and exclusive chats https://www.youtube.com/c/redsummitrf or become a Patreon Premium member for for the same great benefits https://www.patreon.com/redsummitrf

#cw #hamradio #kit #soldering #electronics

Video #4 – After interviewing Tim Keen K5DEZ back in 2020, he suggested I homebrew a simple Morse code paddle from a design he came up with. Tim’s design was inspired by an article in QST Magazine by Art Heft K8CIT. He posted information about the project on the Summits on the Air reflector, here:
https://reflector.sota.org.uk/t/anyone-tried-morse-stick-key/19392/19
This the first video of a series of livestreams sessions I did where I built this paddle.

Pressure sensor for the paddle: https://amzn.to/3LypphX
PCB Board (the one I use is discontinued): https://amzn.to/3ERiZGX
Heat Shrink: https://amzn.to/3ZsId7Q
Circuit Board Holder: https://amzn.to/3yWAItJ
The flux I use: https://amzn.to/3nf5Sda
Solder: https://amzn.to/3lzeWJj
Soldering Tip Cleaner: https://amzn.to/3M0VPTt
Helping Hands – board holder: https://amzn.to/3JCzgl9

Join this channel and become a Premium Member for early access, behind-the scenes-content, and exclusive chats https://www.youtube.com/c/redsummitrf or become a Patreon Premium member for for the same great benefits https://www.patreon.com/redsummitrf

#cw #hamradio #kit #soldering #electronics

Season 4 starts!!! In this episode of "Just the Hosts" we’ll discuss Brian’s HF receive antenna, Dan’s new kit of materials for learning ham radio, and the details about an upcoming SOTA summit to summit event.

Join us as we talk about how YOU can get involved in portable radio in this episode of the All Portable Discussion Zone “AP/DZ”. Every aspect of Portable Ops is explored in this biweekly live stream as we discuss news, gear, achievements, the workbench, contests, awards and more – find all Portable Ops related topics here.

Join this channel and become a Premium Member for early access, behind-the scenes-content, and exclusive chats: https://www.youtube.com/c/redsummitrf

Twitter:
Charlie NJ7V @NJ7V_
Dan KC7MSU @KC7MSU
Brian W7JET @BBW7JET

Help support this channel – buy us a Coke: https://www.buymeacoffee.com/RedSummitRF
Red Summit RF Amazon Storefront: https://www.amazon.com/shop/redsummitrf

#APDZ #SOTA #HamRadio #PortableOps #POTA

Video #3 – After interviewing Tim Keen K5DEZ back in 2020, he suggested I homebrew a simple Morse code paddle from a design he came up with. Tim’s design was inspired by an article in QST Magazine by Art Heft K8CIT. He posted information about the project on the Summits on the Air reflector, here:
https://reflector.sota.org.uk/t/anyone-tried-morse-stick-key/19392/19
This the first video of a series of livestreams sessions I did where I built this paddle.

Pressure sensor for the paddle: https://amzn.to/3LypphX
PCB Board (the one I use is discontinued): https://amzn.to/3ERiZGX
Heat Shrink: https://amzn.to/3ZsId7Q
Circuit Board Holder: https://amzn.to/3yWAItJ
The flux I use: https://amzn.to/3nf5Sda
Solder: https://amzn.to/3lzeWJj
Soldering Tip Cleaner: https://amzn.to/3M0VPTt
Helping Hands – board holder: https://amzn.to/3JCzgl9

Join this channel and become a Premium Member for early access, behind-the scenes-content, and exclusive chats https://www.youtube.com/c/redsummitrf or become a Patreon Premium member for for the same great benefits https://www.patreon.com/redsummitrf

#cw #hamradio #kit #soldering #electronics

Video #2 – After interviewing Tim Keen K5DEZ back in 2020, he suggested I homebrew a simple Morse code paddle from a design he came up with. Tim’s design was inspired by an article in QST Magazine by Art Heft K8CIT. He posted information about the project on the Summits on the Air reflector, here:
https://reflector.sota.org.uk/t/anyone-tried-morse-stick-key/19392/19
This the first video of a series of livestreams sessions I did where I built this paddle.

Pressure sensor for the paddle: https://amzn.to/3LypphX
PCB Board (the one I use is discontinued): https://amzn.to/3ERiZGX
Heat Shrink: https://amzn.to/3ZsId7Q
Circuit Board Holder: https://amzn.to/3yWAItJ
The flux I use: https://amzn.to/3nf5Sda
Solder: https://amzn.to/3lzeWJj
Soldering Tip Cleaner: https://amzn.to/3M0VPTt
Helping Hands – board holder: https://amzn.to/3JCzgl9

Join this channel and become a Premium Member for early access, behind-the scenes-content, and exclusive chats https://www.youtube.com/c/redsummitrf or become a Patreon Premium member for for the same great benefits https://www.patreon.com/redsummitrf

#cw #hamradio #kit #soldering #electronics

Video #1 – After interviewing Tim Keen K5DEZ back in 2020, he suggested I homebrew a simple Morse code paddle from a design he came up with. Tim’s design was inspired by an article in QST Magazine by Art Heft K8CIT. He posted information about the project on the Summits on the Air reflector, here:
https://reflector.sota.org.uk/t/anyone-tried-morse-stick-key/19392/19
This the first video of a series of livestreams sessions I did where I built this paddle.

Pressure sensor for the paddle: https://amzn.to/3LypphX
PCB Board (the one I use is discontinued): https://amzn.to/3ERiZGX
Circuit Board Holder: https://amzn.to/3yWAItJ
The flux I use: https://amzn.to/3nf5Sda
Solder: https://amzn.to/3lzeWJj
Soldering Tip Cleaner: https://amzn.to/3M0VPTt
Helping Hands – board holder: https://amzn.to/3JCzgl9

Join this channel and become a Premium Member for early access, behind-the scenes-content, and exclusive chats https://www.youtube.com/c/redsummitrf or become a Patreon Premium member for for the same great benefits https://www.patreon.com/redsummitrf

#cw #hamradio #kit #soldering #electronics

Sandy and I recently took a road trip to Mesa Verde National Park. On the way there we stopped at the Four Corners Monument and Monument Valley, and on the way back we swung by Canyon de Chelly National Monument. It was an amazing trip. While staying in Mesa Verde, we activated the park for Parks on the Air (POTA) on two separate days. Each day we activated the park from a Summits on the Air (SOTA) peak.

Become a Red Summit RF Premium member for early access, behind-the scenes-content, exclusive chats, and more by clicking "join" above.

Red Summit RF Amazon Storefront: https://www.amazon.com/shop/redsummitrf

Help support this channel – buy me a Coke: https://www.buymeacoffee.com/RedSummitRF

X: @NJ7V_
Instagram: RedSummitRF
Facebook: Red Summit RF
TikTok: RedSummitRF

#HamRadio #SOTA #CW #MorseCode #PortableRadio #QRP #POTA

Our guest for this All Portable Discussion Zone episode is Gil AK4YH/F4WBY. Gil has a fantastic YouTube channel about operating low power portable ham radios without grid power, called Radio Prepper. Gil has been using social media for years as a means to promote the skill of emergency radio techniques. We’ll talk to him about his tutorials, product reviews, field operations, and more in this episode.

Gil’s YouTube site: https://www.youtube.com/@RadioPrepper
Gil’s Facebook page: https://www.facebook.com/groups/radiopreppers/

Join us as we talk about how YOU can get involved in QRP Kit Building and QRP portable radio communications in this episode of the All Portable Discussion Zone “AP/DZ”. Every aspect of Portable Ops is explored in this biweekly live stream as we discuss news, gear, achievements, the workbench, contests, awards and more – find all Portable Ops related topics here.

Join this channel and become a Premium Member for early access, behind-the scenes-content, and exclusive chats https://www.youtube.com/channel/UCHriEQX4EK2b0QS7EgSvjmg/join

Twitter:
Charlie NJ7V @NJ7V_
Dan KC7MSU @KC7MSU
Brian W7JET @BBW7JET

Help support this channel – buy us a Coke: https://www.buymeacoffee.com/RedSummitRF
Red Summit RF Amazon Storefront: https://www.amazon.com/shop/redsummitrf

#APDZ #SOTA #PortableOps #HamRadio #POTA

The CWops Test, also known as the CWT is a one hour Morse code event that occurs every week at four separate times. Hosted by the CWops (a club for CW operators), this event happens every Wednesday at 1300z and 1900z, and every Thursday at 0300z and 0700z. This is one full our of one of theses sessions where I participate as a "runner", which means I call for stations to contact me. Search and Pounce (S&P) stations move from one "runner" to another.

CWops Website: https://cwops.org/
CWops CWT: https://cwops.org/cwops-tests/

Become a Red Summit RF Premium member for early access, behind-the scenes-content, exclusive chats, and more by clicking "join" above.

Red Summit RF Amazon Storefront: https://www.amazon.com/shop/redsummitrf

Help support this channel – buy me a Coke: https://www.buymeacoffee.com/RedSummitRF

X: @NJ7V_
Instagram: RedSummitRF
Facebook: Red Summit RF
TikTok: RedSummitRF

#HamRadio #SOTA #CW #MorseCode #PortableRadio #QRP