A custom controller board and some ham-genuity transforms this repeater. See how a Pi 4 (or even a $30 Pi Zero 2 W) can give new life to old tech. Cable pinout link below! #hamradio
DIY Arduino Project: Connecting Boards with Pin Headers #shorts
Easily connect two boards using pin headers! Place male pin headers on the bottom board, then add pin sockets. This method ensures proper alignment and secure connections.
🚀 Turn your old radios into digital-mode powerhouses! In this video, I show you the TOADs DI board and the new DI6 daughter board — a plug-and-play sound card interface that connects your radio to your computer over USB-C.
With just one board, you can run:
• Winlink 📡
• APRS 🚗
• FT8 🌐
• ANY digital mode you want
No more struggling with cables, custom wiring, or expensive interfaces — the TOADs DI6 makes it simple. (Of course if you like that kinda thing, the TOADs DI is for you!)
📌 In this video, I’ll show you:
• What the DI6 is and how it works
• How to connect it to your radio & PC
• Live demo of digital modes in action
• Why it might be the easiest way to bring your rig into the modern digital world
Clean Through Holes: Solder Wick Flux Magic! #shorts
See how solder wick makes cleaning pin headers quick and easy. Flux helps transfer heat, pulling solder into the wick. A simple, effective solution!
🚀 Turn your old radios into digital-mode powerhouses! In this video, I show you the TOADs DI board and the new DI6 daughter board — a plug-and-play sound card interface that connects your radio to your computer over USB-C.
With just one board, you can run:
• Winlink 📡
• APRS 🚗
• FT8 🌐
• ANY digital mode you want
No more struggling with cables, custom wiring, or expensive interfaces — the TOADs DI6 makes it simple. (Of course if you like that kinda thing, the TOADs DI is for you!)
📌 In this video, I’ll show you:
• What the DI6 is and how it works
• How to connect it to your radio & PC
• Live demo of digital modes in action
• Why it might be the easiest way to bring your rig into the modern digital world
Xiegu broke your radio out from under you… AGAIN! I’m going to show you how to fix it.
👉 Get your Firmware Download Here: https://www.radioddity.com/pages/xiegu-download
👉 Xiegu G90: https://geni.us/PoFT
👉 Xiegu DE-19 Sound/Amp/Rig Control: https://geni.us/9qBzyI
👉 Use Code TO15 for $15 off at Radioddity
👉 Check out the Geekom AX8 MiniPC: https://geni.us/zTLB
Click the 👍 Like Button, 🤡 Leave a Comment, ❤️ Subscribe
👉 Support The Channel 👈
❤️ Patreon: https://www.patreon.com/temporarilyoffline
📺 Youtube Memberships: https://www.youtube.com/temporarilyoffline/join
💸 Tip Jar: https://paypal.me/temporarilyoffline
🛒 Amazon Link: https://www.amazon.com/shop/temporarilyoffline
📻 Use Code TO15 for $15 off at Radioddity: https://www.radioddity.com/?ref=bpajyqft
🖍️ How I make my Thumbnails: https://partner.canva.com/c/3622632/647168/10068
⚡ Meter I use in my videos: https://kaiweets.com/?sca_ref=2859744.05ZtMxNK23
👉 Fun Stuff 👈
🫵 We want YOU on TOADs Discord: https://discord.gg/97tkMEc
🕊️ Twitter: https://twitter.com/KiloMike9Golf
😸 Github: https://github.com/TemporarilyOffline
Where possible, all links are affiliate links, this youtube thing is an expensive endeavor and every little bit helps.
Pinecil Soldering Iron: Tiny, Fast, and Awesome! #shorts
This Pinecil soldering iron is USB-C or barrel jack powered, tiny, and heats up FAST. Get great solder jobs by using a quality USB power supply or a bench power supply.
🚀 Turn your old radios into digital-mode powerhouses! In this video, I show you the TOADs DI board and the new DI6 daughter board — a plug-and-play sound card interface that connects your radio to your computer over USB-C.
With just one board, you can run:
• Winlink 📡
• APRS 🚗
• FT8 🌐
• ANY digital mode you want
No more struggling with cables, custom wiring, or expensive interfaces — the TOADs DI6 makes it simple. (Of course if you like that kinda thing, the TOADs DI is for you!)
📌 In this video, I’ll show you:
• What the DI6 is and how it works
• How to connect it to your radio & PC
• Live demo of digital modes in action
• Why it might be the easiest way to bring your rig into the modern digital world
DIY USB Fob Hack: Candy and Wires Made Easy! #shorts
This project started from silence. I sprinkled candy on a USB sound fob, tried to wire it, and it was HARD. What if this was easy? That’s my life’s motto.
🚀 Turn your old radios into digital-mode powerhouses! In this video, I show you the TOADs DI board and the new DI6 daughter board — a plug-and-play sound card interface that connects your radio to your computer over USB-C.
With just one board, you can run:
• Winlink 📡
• APRS 🚗
• FT8 🌐
• ANY digital mode you want
No more struggling with cables, custom wiring, or expensive interfaces — the TOADs DI6 makes it simple. (Of course if you like that kinda thing, the TOADs DI is for you!)
📌 In this video, I’ll show you:
• What the DI6 is and how it works
• How to connect it to your radio & PC
• Live demo of digital modes in action
• Why it might be the easiest way to bring your rig into the modern digital world
I Installed Linux Mint on a Brand-New PC… Windows 11 Never Had a Chance
I took a brand-new PC, straight out of the box, and installed Linux Mint instead of Windows 11 — no tweaking, no command-line nonsense, no pain.
The PC:
👊 PELADN WO4 AMD Ryzen 5
👊 32GB RAM
👊 1TB SSD
👊 Tool Free Case
👉 Amazon Link: https://geni.us/o0Ar 👈
• Discount: 10% off
• Code: PELADN1220
• Validity window:
– Starts: Dec 19, 2025 (05:00 PST)
– Ends: Mar 31, 2026 (23:59 PDT)
In this video, I show:
• How easy Linux Mint is to install on modern hardware
• Why you don’t need Windows preinstalled anymore
• How I replace common Windows apps using alternative.to
• What comes built-in with Linux Mint (and why it’s enough for most people)
• How fast you can go from “new PC” → “fully usable system”
This isn’t a “Linux for nerds” demo.
This is Linux for normal people who just want their computer to work.
If you’ve ever said:
• “Linux is too complicated”
• “I won’t have the apps I need”
• “It’s only for programmers”
…this video is for you.
No hype. No coping. Just a clean install and real-world use.
Windows isn’t mandatory anymore.
And once you see how easy this is, it’s hard to unsee.
👊 Finish him.
Click the 👍 Like Button, 🤡 Leave a Comment, ❤️ Subscribe
👉 Support The Channel 👈
❤️ Patreon: https://www.patreon.com/temporarilyoffline
📺 Youtube Memberships: https://www.youtube.com/temporarilyoffline/join
💸 Tip Jar: https://paypal.me/temporarilyoffline
🛒 Amazon Link: https://www.amazon.com/shop/temporarilyoffline
📻 Use Code TO15 for $15 off at Radioddity: https://www.radioddity.com/?ref=bpajyqft
🖍️ How I make my Thumbnails: https://partner.canva.com/c/3622632/647168/10068
⚡ Meter I use in my videos: https://kaiweets.com/?sca_ref=2859744.05ZtMxNK23
👉 Fun Stuff 👈
🫵 We want YOU on TOADs Discord: https://discord.gg/97tkMEc
🕊️ Twitter: https://twitter.com/KiloMike9Golf
😸 Github: https://github.com/TemporarilyOffline
Where possible, all links are affiliate links, this youtube thing is an expensive endeavor and every little bit helps.
DIY Digital Interface: Easy Soldering Project for Beginners! #shorts
Let’s build a digital interface! This requires soldering, but you can do it. Start somewhere easy, with a friend helping out. Here I am, helping you out!
🚀 Turn your old radios into digital-mode powerhouses! In this video, I show you the TOADs DI board and the new DI6 daughter board — a plug-and-play sound card interface that connects your radio to your computer over USB-C.
With just one board, you can run:
• Winlink 📡
• APRS 🚗
• FT8 🌐
• ANY digital mode you want
No more struggling with cables, custom wiring, or expensive interfaces — the TOADs DI6 makes it simple. (Of course if you like that kinda thing, the TOADs DI is for you!)
📌 In this video, I’ll show you:
• What the DI6 is and how it works
• How to connect it to your radio & PC
• Live demo of digital modes in action
• Why it might be the easiest way to bring your rig into the modern digital world
Soldering Success: Perfect Parallel Setup for Digital Interface #shorts
Watch a prototype go from messy breadboard to sleek, soldered package. See perfect parallel alignment, bright LEDs, and a clean finish. Ready for radio magic!
🚀 Turn your old radios into digital-mode powerhouses! In this video, I show you the TOADs DI board and the new DI6 daughter board — a plug-and-play sound card interface that connects your radio to your computer over USB-C.
With just one board, you can run:
• Winlink 📡
• APRS 🚗
• FT8 🌐
• ANY digital mode you want
No more struggling with cables, custom wiring, or expensive interfaces — the TOADs DI6 makes it simple. (Of course if you like that kinda thing, the TOADs DI is for you!)
📌 In this video, I’ll show you:
• What the DI6 is and how it works
• How to connect it to your radio & PC
• Live demo of digital modes in action
• Why it might be the easiest way to bring your rig into the modern digital world
Why Doesn't The AIOC work with the Mini? -- Ham Nuggets Season 6 Episode 47
I started selling the AIOC on my website… I figured why not test it with the Baofeng Mini, right? Turns out there’s a little problem, and today, we’re going to figure out what that is – and fix it! Probably.
Click the 👍 Like Button, 🤡 Leave a Comment, ❤️ Subscribe
👉 Support The Channel 👈
❤️ Patreon: https://www.patreon.com/temporarilyoffline
📺 Youtube Memberships: https://www.youtube.com/temporarilyoffline/join
💸 Tip Jar: https://paypal.me/temporarilyoffline
🛒 Amazon Link: https://www.amazon.com/shop/temporarilyoffline
📻 Use Code TO15 for $15 off at Radioddity: https://www.radioddity.com/?ref=bpajyqft
🖍️ How I make my Thumbnails: https://partner.canva.com/c/3622632/647168/10068
⚡ Meter I use in my videos: https://kaiweets.com/?sca_ref=2859744.05ZtMxNK23
👉 Fun Stuff 👈
🫵 We want YOU on TOADs Discord: https://discord.gg/97tkMEc
🕊️ Twitter: https://twitter.com/KiloMike9Golf
😸 Github: https://github.com/TemporarilyOffline
Where possible, all links are affiliate links, this youtube thing is an expensive endeavor and every little bit helps.
